Low-profile with elevating bed under 7 metres with twin beds in the back, with one of the two beds exceeding two metres in length.
Low-profile with elevating bed under 7 metres with twin beds in the back, with one of the two beds exceeding two metres in length.
Includes the weight of the empty base vehicle, the driver (75 kg), fuel and fluid tanks filled to at least 90%, fresh water tank filled to maximum capacity as declared by the manufacturer ref:’travel’, gas cylinder for domestic use with a maximum weight as declared by the manufacturer. The mass in running order, and consequently the payload and/or travel seats, may vary depending on the installed accessories.
The Mass in Running Order value shown in the commercial documentation is the value calculated during the homologation procedure and may differ from the delivered vehicle’s value due to production tolerances. The legally allowed deviation is ±5%. During the purchasing process, it is necessary to verify the weight of the optional equipment intended to be installed on the vehicle.
PAYLOAD
It is the difference between the technically permissible maximum mass and the mass in running order. The payload includes elements for habitation, passengers ‘transported’ as defined by the manufacturer (excluding the driver), and personal belongings. The minimum payload calculation is based on the following parameters:
– 75 kg for each passenger (excluding the driver)
– 10 kg of luggage for each passenger and the driver
– 10 kg for each meter of vehicle length
The remaining payload can be used for installing accessories or additional luggage.
Anything not included in the standard version of the vehicle, both cell and chassis, increases the mass in running order and consequently reduces the payload, potentially reducing the number of approved seats.
Available payloads result from the difference between the technically permissible maximum mass and the mass in running order.
During the purchasing process, it is necessary to verify the weight of the optional equipment intended to be installed on the vehicle.
The weight of non-standard accessories is not included in the mass in running order. Additional accessories and devices reduce the payload by an amount equal to their weight; the weight impact of individual accessories is listed in the appropriate column in the price list or can be requested at our dealers’ shops
Please note that the law does not allow exceeding the technically permissible maximum mass, which can be found in the technical sheet specifications.
Ensure that the maximum axle loads and the technically permissible maximum mass are not exceeded during full vehicle loading.
The number of approved seats may vary depending on the regulations of individual countries regarding circulation.
A wide range of packages to customise your McLouis according to your preferences. Dedicated to those who love living outdoors, who do not give up their winter holidays, who want a motorcaravan equipped with every comfort. The choice is yours.
The high-quality premium upholstery is enhanced by quilted sections in natural shades of cream, beige and hazelnut – elegant colours that are easy to match with your favourite accessories and furnishings.
Fabric and imitation leather
Microfiber
Imitation leather
The body of McLouis motorhomes is manufactured in specialized production departments through high-precision industrial processes that guarantee the highest quality standards. The elimination of thermal bridges results in maximum waterproofing and acoustic insulation of the living unit, ensuring better insulation and greater protection against infiltration. The use of new materials with high insulating performance, such as bi-composite resins, has made it possible to reduce the weight of the body and make it more solid at the same time.
Please wait while you are redirected to the right page...